Toyota Tundra 3rd Gen 2022-2026, BILSTEIN B8 8112 Black Hawk Front Corner Module, 1-2.25in Lift

A loaded Tundra on a washboard road is a lot of truck to keep composed. Factory dampers fade, the front end chatters over the small stuff and bottoms on the big hits, and by the end of the day you're tired before camp is even set up.

The BILSTEIN B8 8112 Black Hawk is a complete front corner module with a 60mm piston, a 2.65 in aluminum body and a finned remote reservoir. ZoneControl damping firms up as the shock compresses, which limits hard bottoming while keeping the ride smooth over small bumps.

Install the pair at the front, set high- and low-speed compression with the click adjusters, and tune again when the load changes. The truck stays composed from the trailhead to camp, loaded or empty.

Key Features

• 3-way adjustable: high- and low-speed compression click adjusters, plus internal bump stop
• ZoneControl position-sensitive damping in compression and rebound
• Finned aluminum remote reservoir
• Complete coilover with spring and spring seat

Specifications

• Piston diameter: 60 mm; shaft diameter: 22 mm
• Body: 2.65 in OD aluminum, monotube, smooth body
• Collapsed length 16.80 in; extended length 21.83 in
• Mounts: upper eye 12 mm, lower eye 19.05 mm
• Finish: zinc-plated dampers, black springs
• Boot not included

Fitment

• Toyota Tundra 3rd Gen 2022-2026 (front; driver side 41-332245, passenger side 41-332238; for 1 to 2.25 in of front lift)

MPN 41-332245 (Driver Side) · UPC 651860949543

MPN 41-332238 (Passenger Side) · UPC 651860949567