Toyota Tundra 3rd Gen 2022-2026, BILSTEIN B8 8100 Black Hawk Shock Absorber, Rear, 0-1in Lift

Long dirt roads put a lot of heat into the rear dampers of a Tundra that is carrying a camp. The back end starts to float, and the controlled ride fades with each mile.

The BILSTEIN B8 8100 Black Hawk has a 2.65in aluminum body, a finned remote reservoir and ZoneControl position sensitive damping for the Toyota Tundra 3rd Gen 2022-2026. Click adjusters set high and low speed compression, and an internal bump stop handles the end of travel. That combination limits hard bottoming while keeping small bumps comfortable.

Fit the shock in the factory location, secure the reservoir and test drive. The Tundra feels controlled where it used to feel loose.

Key Features

• 2.65in aluminum body with finned aluminum remote reservoir
• ZoneControl position sensitive damping controlled by independent pistons
• Click adjusters for high and low speed compression plus an adjustable internal bump stop (JCO)
• For 0-1in of rear lift

Specifications

• Position: rear (driver side and passenger side variants)
• Lift height: 0-1in
• Collapsed length: 16.78 in
• Extended length: 25.18 in
• Lower mount: Eye 19.1mm
• Upper mount: Stem
• Internal design: Monotube
• Finish: EVO Grey
• Reservoir: Yes, Finned Aluminum
• Body design: 60mm ID Smooth Body (Non-Coilover)
• Body diameter (OD): 2.65 in
• Piston diameter: 60mm
• Body material: Aluminum
• Boot included: No
• Spring seat included: No
• Shaft diameter: 18mm
• Damping adjustment: Click Adjusters for High and Low Speed Compression plus internal Bump Stop (JCO)
• Shipping weight: 20 lb
• Made in USA

Fitment

• Toyota Tundra 3rd Gen 2022-2026

For vehicles with 0-1in of rear lift.

Warranty

24-month warranty.

MPN 25-332315 (Driver Side) · UPC 651860954165

MPN 25-352016 (Passenger Side) · UPC 651860954172