Toyota Tundra 3rd Gen 2022-2026 & Sequoia 2023-2026, ICON EXP 2.5 Series Front Coilover, 0-3in Lift

Lifting a Tundra or Sequoia on spacers leaves the factory dampers doing a job they were not tuned for. The front rides harsh on small bumps and uses up travel at the top.

ICON EXP coilovers bridge the gap between spacer lifts and threaded-body coilovers. They use the 2.5 Series shock with an internal reservoir, an inverted shaft-up design with a 7/8in chrome plated shaft, and the factory coil and hardware. A snap ring sets front lift anywhere from 0 to 3in, and the shock is fully rebuildable and re-tunable.

Fit a pair using the factory coil hardware and set the ride height. You get lift and custom-tuned damping without a full coilover swap.

Key Features

• Vehicle-specific design for the 2022-2026 Toyota Tundra and 2023-2026 Sequoia
• Fully rebuildable and re-tunable; vehicle-specific tuned damping
• 2.5 Series aluminum shock with an internal reservoir; adjustable ride height from 0-3in of front lift with the use of a snap ring
• Uses the factory coil and coil hardware
• Inverted shaft-up design with a 7/8in induction hardened, chrome plated shaft
• Impact extruded, hard anodized aluminum cylinder; CNC machined 6061 aluminum components with a black anodized finish
• PTFE-lined spherical bearing

Specifications

• Body: 2.5in; shaft: 7/8in
• Compressed length: 15.42in; extended length: 21.21in; travel: 5.8in
• Upper mount: stem; lower mount: eyelet
• Reservoir: internal; compression and rebound: not adjustable
• Shipping weight: 10 lb
• Shipping carton: 32 x 6 x 5 in

Fitment

• Toyota Tundra 3rd Gen 2022-2026 (SR5 with TRD Sport packages: 1-4in of lift; does not fit TRD Pro)
• Toyota Sequoia 2023-2026 (most trims: 0-3in of lift; TRD Off-Road package: 0-1in; does not fit TRD Pro)

Not compatible with vehicles equipped with Adaptive Variable Suspension (AVS).

Notes

• Sold individually; two are required per vehicle.
• Tundra lift heights above 2.25in require a sway bar drop bracket kit, which is required at every lift height on the Sequoia.
• Models with the TRD aluminum skid plate need an additional ICON skid plate part.
• ICON does not recommend lifting above 2.25in without ICON upper control arms; incorrect alignment can damage the front axles on 4WD models.
• On 4WD models without the TRD Off-Road package, ICON recommends its differential drop or Toyota TRD axles to prevent front axle damage.
• Shocks are fully serviceable. Lift heights are for a stock vehicle.

MPN 58671 · UPC 840103414331