Toyota 4Runner 6th Gen 2025-2026, ICON V.S. 2.0 Series Rear Shock Absorber, Remote Reservoir, Passenger Side, 0-3in Lift

Rear shocks on a 4Runner take the heat from every washboard mile and every loaded climb. When they fade, the back end floats and the ride goes soft just when you want control.

This ICON V.S. 2.0 Series shock for the rear passenger side uses a nitrogen-charged monotube with a remote reservoir and a 6063 anodized aluminum body for heat dissipation. A 5/8in chrome plated shaft resists pitting, polyurethane bushings and forged steel stems give an OE-type fit, and it is fully rebuildable and re-tunable.

Fit it in the factory location with its driver side partner and drive. The rear stays composed with 0-3in of rear lift.

Key Features

• Nitrogen-charged monotube with a remote reservoir
• One-piece linear and digressive piston with vehicle-specific valving
• 5/8in chrome plated hardened steel shaft
• 6061 aluminum rod end, top cap and internals; 6063 anodized aluminum body and reservoir tubing
• Polyurethane bushings, zinc plated sleeves and forged steel mounting stems for OE-type fitment
• Nitrile rubber top-out bumper; fully rebuildable and re-tunable

Specifications

• Position: rear, passenger side
• Body: 2in OD aluminum; bore: 1.75in; shaft: 5/8in
• Compressed length: 16.1in; extended length: 26.5in; stroke: 10.4in
• Reservoir: 2in diameter, 8in long, on a 29in hose
• Upper mount: M12-1.25 stem; lower mount: eyelet
• Compatible with 0-3in of rear lift over stock
• Shipping weight: 11 lb
• Shipping carton: 40 x 7 x 3 in

Fitment

• Toyota 4Runner 6th Gen 2025-2026 (not compatible with Adaptive Variable Suspension models)

Notes

• Sold individually; the matching driver side shock is also required.
• Shocks are fully serviceable. Lift heights are for a stock vehicle.

MPN 56524R · UPC 840103435053