Rigid E-Series PRO 40in Spot/Flood Combo Light Bar, White Housing

A night run changes by the mile, from a wide switchback that needs light on both sides to a straight where distance matters. A bar that only floods or only spots covers half of that.

The Rigid E-Series PRO 40in Spot/Flood Combo blends both patterns in a white aluminum housing. It draws 299 W and puts out 35,680 raw lumens, with a 19 degree horizontal beam, and E-Series PRO LEDs deliver up to 111 percent more raw lumens than earlier bars. The lens is impact-resistant polycarbonate, and the circuit board is blacked out.

Bolt on the L brackets, connect the harness with switch, and switch on. One bar handles close and far.

Key Features

• Spot/flood combo optic
• Up to 111 percent more raw lumens than earlier E-Series bars
• White powder-coated housing
• Blacked-out circuit board
• Over/under voltage, reverse polarity and RFI/EMI protection
• Integrated thermal management; pressure equalizing vent
• Impact-resistant polycarbonate lens; high-grade aluminum alloy housing
• UV resistant powder coat

Specifications

• Optics: spot/flood combo
• Power: 299 W
• Amp draw: 21 A
• Raw lumens: 35,680
• Horizontal beam angle: 19 degrees
• Length including mounting bracket: 44in; height: 2.7in
• Weight: 15 lb
• Operating voltage: 9-36 VDC
• Ingress protection: IP68 compliant
• Operating temperature: -40 F to +145 F
• LED lifespan: 50,000 hours or more

In the Box

• Two stainless steel L-shape brackets
• Open leads, no connector
• Harness with switch

Warranty

Limited lifetime warranty.

Notes

• Off-road use only.

MPN 840313 · UPC 849774029486