KC HiLiTES FLEX ERA 1 LED 2-Light Backup Light Kit, Spread Beam, Rear Extended Harness

Backing a trailer into a dark site or turning around on a narrow trail takes more light than reverse lamps give. Rear lights that sit apart from the headlight setup keep the rear view clear.

The FLEX ERA 1 2-Light Kit is a backup or reverse light kit with an extended backup harness and a 3-position switch. Each light makes 2,430 lumens in a spread beam that reaches 127.3 m, on a 9V-36V supply. The Standard version uses a universal bottom-mount bracket, and the Flush version has pre-installed flush mount faceplates for a low-profile install. Both fit rear bumpers with existing reverse or dust light cutouts. Choose the mount, run the long harness forward, and reverse by real light.

Key Features

• Two FLEX ERA 1 LED lights in a spread beam pattern
• Extended backup harness with a 3-position switch
• Standard version: universal bottom-mount bracket
• Flush version: pre-installed flush mount faceplates for a low-profile install in a rear bumper
• IP68 rated

Specifications

• Beam pattern: spread
• Beam distance: 67.2 m flood / 127.3 m spread / 176.1 m spot
• Candela: 4,510 cd flood / 16,200 cd spread / 31,000 cd spot
• Lux: 45.1 / 162 / 310
• Lumens: 2,430 per light
• Wattage per light: 5W / 23W; total 10W / 46W
• Amp draw: 0.83A / 3.83A
• Voltage: 9V-36V
• Ingress protection: IP68
• Shipping weight: 5 lb (Standard); 4.5 lb (Flush)
• Shipping carton: 6.75 x 7.25 x 6.25 in (Standard); 6.25 x 6.5 x 7.25 in (Flush)

In the Box

• 2 FLEX ERA 1 lights
• Extended backup harness with 3-position switch
• Standard: 2 brackets, 2 covers and hardware
• Flush: 2 pre-installed flush mount faceplates

Notes

• Fits rear bumpers with existing reverse or dust light cutouts.
• Shields and the black or yellow cover cannot be used with the flush mount faceplates.

MPN 520 (Standard) · UPC 084709005207

MPN 521 (Flush) · UPC 084709005214