Jeep Wrangler TJ/LJ 1997-2006, Nemesis Industries Crawler Replacement and Overlay Flare, 4.5in

If a TJ does not need extra room above the tire, a full highline fender is more than the job calls for. This Crawler front flare takes the simpler route: unbolt the factory fender and bolt this one in. It is cut from 3/16 in aluminum, formed and welded into one seamless piece, and it clears the tire by an extra 5 inches behind it while removing the overhang of the stock fender and flare. The factory hood stays, and factory hardware does the mounting.

Key Features

• Replaces the factory front fender
• Designed for the existing hood
• Adds 5 in of clearance behind the tire and removes the stock fender and flare overhang
• Cut by water jet from 3/16 in aluminum, formed on a CNC press brake and welded
• Seamless metal-finished surface
• Provisioned for a 3/4 in LED marker/turn signal light

Specifications

• Material: 3/16 in aluminum
• Flare height: 4.5 in
• Finishes: bare, semi-gloss black powder coat, textured black powder coat
• Install time: about five hours for the pair

Fitment

• Jeep Wrangler TJ/LJ 1997-2006 (TJ short wheelbase, LJ long wheelbase)

Notes

• No drilling or cutting; factory hardware is reused
• Inner fender liners and an underhood accessory relocation bracket kit are separate products

MPN 105340 (Bare)

MPN 105341 (Semi-Gloss Black Powder Coat (Cardinal BK-08))

MPN 105342 (Textured Black Powder Coat (Cardinal BK-59))