A lifted JL with long travel shocks can let a rear spring work loose in the coil tower. Add bumpers, a winch and gear, and the stock rate falls behind.
These Synergy rear lift coil springs were designed from a clean sheet for the JL. The multi-rate design has a soft initial rate that helps keep the spring in place, and a ride rate slightly stiffer than OEM. This version gives 2 inches of lift on 2-door and 1 inches on 4-door models.
Right and left springs differ in length so the vehicle sits level.
Key Features
- Multi-rate coil springs with a soft initial rate, made unique to the JL
- Ride rate slightly stiffer than OEM to account for bumpers, winches, skid plates and gear
- Right and left specific springs for a level stance
- Made in the United States from high-quality steel
- Pre-set at the factory and able to set solid without overstressing the material
- Lifetime warranty or guarantee against sagging and breakage
- 115/150 lb/in initial/ride rate, 5.6 inch collapsed length, 17.7-17.8 inch extended length, minimum 2 inch bump stop spacing
Fitment
- Jeep Wrangler JL 2018-2026
Notes
- Lift heights are measured over stock height for the model and are based on fully loaded Rubicon 3.6L vehicles with HD front and rear bumpers, winch and full size spare. Actual lift varies by model.
- Jeeps with XR equipment will see 1 inch less lift than listed.
MPN 8864-10 · UPC 887753146731