A lifted Jeep needs its front axle centered, and the factory track bar can add to steering shimmy or death wobble under big tires.
This heavy duty adjustable front track bar is considerably stronger than stock and adds lateral stiffness. Its length adjusts on the vehicle, and Synergy Dual Durometer Bushings at both ends need no greasing.
It keeps the factory mounting bolts and hardware and is bent to clear the Synergy Sector Shaft Brace and most aftermarket differential covers.
Key Features
- Made from 1.50 inch x .250 wall DOM
- Adjustable on the vehicle, no jam nuts, with a double adjuster sleeve and pinch bolt
- Maintenance free Dual Durometer Bushings with a Teflon bearing surface at both ends
- Retains factory track bar mounting bolts and hardware
- Abrasion-resistant powder coat finish
- Bent to clear the Synergy Sector Shaft Brace and most aftermarket differential covers
- Compatible with Synergy HD Steering and Sector Shaft Brace
- Limited Lifetime Warranty
Fitment
- Jeep Wrangler JL 2018-2026
- Jeep Wrangler JLU 2018-2026
- Jeep Gladiator JT 2020-2026
Notes
- Compatible from 0 to 4 inches of lift in the stock mounting locations with no bump stop spacing required
- The front track bar relocation bracket and high steer are recommended for lifts of 3 inches and over and require 3 inches of bump stop spacing
- Length range 33.75 to 34.50 inches
- Replacement adjustable joint is 4812-01 and replacement bushings are 4327-01
MPN 8875-01 · UPC 887753146151