Lift a JL or JT and the steering angles go wrong. Bump steer, a front axle that sits off center and a drag link and track bar at poor angles all follow, and the truck drives worse on the road and the trail.
The Synergy Steering Correction Kit is the guide for that problem. It moves the drag link to the top of the steering knuckle and raises the axle side track bar mount 3.25 inches, which flattens both angles, re-centers the axle and raises the roll center.
Bolt the parts on with hand tools, set the length with the Double Adjuster Sleeve, and the front end tracks straight again on a rig with 3 inches of lift or more.
Key Features
- Drag link flip adapter relocates the drag link to the top of the knuckle
- Track bar mount raised 3.25 inches
- Drag link formed from 1.5 inch x .250 wall USA made DOM tubing
- Bracket made from 3/16 inch and 1/4 inch USA made steel
- Greaseable metal-on-metal tie rod ends with dust boots and retaining springs
- Double Adjuster Sleeve and Pinch Bolt Assembly for alignment
- Two stage powder coat
Includes
- 1 x Heavy Duty Drag Link
- 1 x Drag Link Flip Adapter
- 1 x Track Bar Relocation Bracket
Fitment
- Jeep Wrangler JL 2018-2026
- Jeep Gladiator JT 2020-2026
Notes
- Compatible with the factory track bar at 3 inches of lift. Lifts higher than 3 inches accept an aftermarket adjustable track bar.
- Drag link length: 42.625 inch collapsed to 45 inch extended.
MPN 8811-01