Jeep Wrangler JL 2018-2026 & Gladiator JT 2020-2026, Synergy Front Sway Bar Links, 0-4in Lift

Flex is what lets a Jeep climb, and a connected front sway bar fights it. The Synergy Front Sway Bar Links make the disconnect easy: pull the linchpins at the axle, rotate the links up and out of the way, and secure them. They are longer than stock and adjustable for 0 to 4 inches of lift, with sealed tie rod ends and greaseable spherical bushings. Fit them with the Synergy disconnect mounting kit and the front axle gets more articulation when the trail asks for it.

Key Features

• Longer than stock and adjustable to fit 0 to 4 inches of lift
• Quick disconnects release the links for additional flex off-road
• Removable linchpins release the links from the axle
• Sealed tie rod ends link directly to the sway bar
• Greaseable spherical bushings for resistance-free articulation
• Works on all JL and JT models in the fitment list, including Rubicon models with the electronic sway bar disconnect
• No drilling or cutting required, except on stock height vehicles

Specifications

• Material: CNC formed 1020 CR solid steel
• Finish: abrasion-resistant e-coat
• Minimum collapsed length: 9.0 in
• Maximum extended length: 10.0 in (center of the lower bolt hole to the center of the tie rod end stud)
• Replacement bushings: 4100-10
• Replacement tie rod ends: 4165-01

Fitment

• Jeep Wrangler JL / JLU 2018-2026
• Jeep Gladiator JT 2020-2026 (does not fit Mojave: the disconnect brackets do not clear the shock reservoir hose and retainer clips)

For vehicles with 0 to 4 in of lift.

Notes

• Designed for use with the Synergy JL / JLU / JT Sway Bar Disconnect Mounting Kit 8859-12
• For lifts of 2 inches and taller, relocate with the Synergy 8855-02 Sway Bar Relocation Brackets or 8855-11 Front Track Bar Relocation Brackets, with a minimum of 2 inches of front bump stop spacing
• On stock height vehicles, install the links in the stock location on the axle and remove the passenger side sway bar tab; no front bump stop spacing is required
• Rubicon models with the electronic disconnect may still need manual disconnects where there is a lot of suspension down travel, to keep the links from over-centering

MPN 8859-11 · UPC 887753141989