Jeep Wrangler JL 2018-2026 & Gladiator JT 2020-2026, sPOD BantamX 8-Circuit Touchscreen Accessory Control System

Winches, light bars, air compressors and fans all want a switch and a protected circuit, and wiring each one separately takes days. The sPOD BantamX is an 8-circuit, expandable control system for 12 or 24 VDC accessories that runs on one Ethernet cable into the cab. Its touchscreen panel mounts eight switches at once and shows voltage, board temperature and the amperage each accessory draws. Each circuit is rated at 30 amps with battery protection and fault protection. Mount the base, connect the accessories, set up the switches and let the system watch the loads.

Key Features

• 8 circuits rated at 30 amps at 12.5 VDC per circuit; expandable
• Programmable, with battery protection
• Touchscreen shows battery and alternator voltage, board temperature and amperage per switch
• Customizable legends (3 lines of text); one touch off; one second hold on off button shuts all circuits down
• Automatic backlight off after 30 minutes inactive; deep sleep after 6 hours inactive or engine off
• Multiple Source select: one touchscreen controls up to 32 circuits
• Up to 4 BantamX units can be daisy chained
• Integrated low voltage cutoff (LVCO) battery protection with optional override
• Protection against overheating, over-current, shorts, reverse polarity and field collapse
• Built-in Bluetooth for programming the touchscreen

Specifications

• Circuits: 8
• Operating voltage: 12 or 24 VDC
• Finish: powder coat
• Protection: 50 amp auto-resetting circuit breaker
• Shipping weight: 5 lb
• Shipping carton: 13 x 10 x 10 in

Fitment

• Jeep Wrangler JL 2018-2026 (3.6L; diesel and 4xe models require a special bracket; does not fit the 392 V8)
• Jeep Gladiator JT 2020-2026 (3.6L; diesel models require a special bracket)

In the Box

• BantamX base unit
• Touchscreen control panel with its own mounting bracket

Notes

• Each switch can be programmed in the free sPOD app for dimming, strobe, flash, momentary and switch linking, with on-road and off-road modes.
• Pro-Series app features, sold separately, add circuit timers, switch lockout, current limiting and programmable ignition control.
• Bluetooth in the touchscreen is intended for programming. Range runs from about 5 to 15 feet depending on the touchscreen location, surroundings and phone.
• Bluetooth app (free): requires Bluetooth 4.0, Android 8.0 Oreo (API 26) or later, or iOS 11 or newer on an iPhone 7s or newer, iPad 2 or newer or iPad mini, and an existing sPOD system.

MPN 870040 · UPC 816482021927