Jeep Wrangler JL 2018+ & Gladiator JT 2020+, ORACLE Lighting High Performance 20W LED Fog Lights, Sport and Sport S Models, Blue Halo

A fog light mounted low on a Jeep takes the dust, spray and vibration first, and a light that fails on the way to camp leaves the lower edge of the trail in the dark. ORACLE Lighting's 20W LED fog light is a direct-fit replacement with plug-and-play wiring, a polycarbonate housing, epoxy-sealed electronics and an IP67 rating, and it produces 3,000 raw lumens. This version has a pre-installed blue halo. Take out the factory fog light, plug the ORACLE Lighting unit into the existing connector, and aim it. The result is a light that lights the ground near the front wheels and keeps working through grit, spray and washboard.

Key Features

• Direct-fit replacement fog light with plug-and-play wiring
• Black bezel with a pre-installed ORACLE Lighting halo (Blue)
• Phillips ZES 5W LEDs; 1,600 lumens of total light output
• Rugged polycarbonate lamp housing; solid-state luminaire design for vibration resistance
• Epoxy-sealed electronics protect against moisture and corrosion
• Vertical beam adjustability
• Constant current LED driver controls the halos; SMD halos operate across 12V to 24V
• ORACLE Lighting authentication embossed on the inner lamp bezel

Specifications

• Input voltage of light: 9-36V
• Input voltage of halo: 12V
• Wattage: 20W
• Raw lumens: 3,000
• IP rating: IP67
• Current draw: 2.0 A at 12V
• Plug: H10 / 9145 / 5202
• Warranty period: 2 years

Fitment

• Jeep Wrangler JL 2018+ (Sport and Sport S models only)
• Jeep Gladiator JT 2020+ (Sport and Sport S models only; Sport models with the tow package need the 5846 series)

Sahara, Overland and Rubicon models use the 5846 series.

In the Box

• 2 ORACLE Lighting 20W LED fog lights
• 2 plug-and-play wiring adapters

Warranty

2 years.

Notes

• White or amber halo: additional wire may be needed. The DRL wire cannot be used as a power source. Tapping into the park lights gives manual control of the halo during daytime driving, and the halo turns on automatically in night mode when the switch is set to AUTO. For full automatic control, use fuse F52 in the engine compartment fuse panel.
• Red, blue or green halo: extend the red (+) wire to a controller, toggle switch or existing headlight halo, and extend the black (-) wire to a common ground.

MPN 5847-002 · UPC 810030393139