The steering box sector shaft pushes hard on the frame section that the track bar mounts to. This brace supports the sector shaft on the Wrangler JL and Gladiator JT and attaches to the crossmember, so force loads split between the frame and the crossmember. It mounts on the opposite side from the steering box to relieve stress on the steering box bolts. The 3/8in steel plate is CAD designed and laser-cut, and a self-lubricating bronze bushing carries the load. Installation takes about one hour and needs some drilling.
Key Features
- 3/8in formed steel plate, CAD designed and laser-cut
- Chromoly sector shaft nut, laser-engraved
- High-load oil-embedded bronze bushing that is self-lubricating and service-free
- 100% bearing contact
- Mounts opposite the steering box to relieve stress on the steering box bolts
- Made in the USA
Specifications
- Material: 3/8in hot-rolled steel
- Finish: gold zinc brace, clear zinc sector shaft nut
- Bushing dynamic radial load rating: 3,500 lbs
- Installation difficulty: easy
- Body modification: some drilling
- Install time: 1 hour
Fitment
- Jeep Wrangler JL 2018-2023
- Jeep Gladiator JT 2020-2023
In the Box
- Sector shaft bracket
- Sector shaft nut
- All required hardware
Notes
- Not made for 2024 and newer models.
- Not for factory height Jeeps: a minimum of 2in of bump stop is needed for track bar clearance at full bump.
- Not compatible with a drag link flip kit.
- An alignment by a professional is recommended after installing a MetalCloak suspension.
MPN 7690 · UPC 850028646823