Jeep Wrangler JL 2024-2026 & Gladiator JT 2024-2026, MetalCloak Heavy Duty Front Sway Bar Link Kit, 11-12in

A lifted 2024 or newer JL or JT with electronic sway bar disconnects needs front links sized for the new ride height. Stock links bind at full travel and their bushings wear quickly under bigger tires.

These MetalCloak heavy duty links run 11-12in and keep the factory electronic disconnect working. The rods are 1in OD by .25in wall DOM steel, double adjustable with machined wrench flats, and hard chrome spherical rod ends on a self-lubricating race outlast end link bushings. They bolt into the factory locations with no cutting and suit MetalCloak 2.5in to 5.5in lifts.

Install takes about an hour. Set the length, tighten the studs, and the front bar is ready for road and trail.

Key Features

• 11-12in extended length
• Keeps the factory electronic sway bar disconnect
• 1in OD x .25in wall DOM steel rods, double adjustable
• Hard chrome plated spherical rod ends with a self-lubricating race
• 3/4in mounting pins
• Bolts into factory locations, no cutting
• Gold zinc plated, made in the USA

Specifications

• Length: 11-12in
• Rods: 1in OD x .25in wall DOM A513 steel
• Mount studs: 1.25in 4130 steel
• Rod ends: Chromoly steel with self-lubricating race
• Coating: Gold zinc
• Quantity: Pair
• Install time: About 1 hour
• Body modification: None

Fitment

• Jeep Wrangler JL 2024-2026
• Jeep Gladiator JT 2024-2026

For Jeeps equipped with electronic sway bar disconnects. Designed for MetalCloak 2.5in to 5.5in lifts.

In the Box

• Front sway bar end link rods (2)
• Rod ends (4)
• Mount studs (3)

Notes

• MetalCloak recommends a suspension alignment by a specialist after installing MetalCloak suspension parts.

MPN 7424 · UPC 810191172383