Jeep Wrangler JL 2018-2023 & Gladiator JT 2020-2023, MetalCloak Heavy Duty Front Sway Bar Link Kit, 11-12in

A lifted JL or JT with the factory electronic sway bar disconnect needs front links long and strong enough for the new ride height. Stock links bind at full travel and the rubber bushings give up early.

These MetalCloak heavy duty end links run 11-12in and keep the electronic disconnect in service. The rods are 1in OD by .25in wall DOM steel, double adjustable with machined wrench flats, and the hard chrome spherical rod ends ride on a self-lubricating race for longer life than end link bushings. They bolt into the factory locations with no cutting and suit MetalCloak 2.5in to 5.5in lifts.

Install takes about an hour. Set the length, tighten the studs, and the bar stays planted on road and trail.

Key Features

• 11-12in extended length
• Keeps the factory electronic sway bar disconnect
• 1in OD x .25in wall DOM steel rods, double adjustable
• Hard chrome plated spherical rod ends with a self-lubricating race
• 3/4in mounting pins
• Bolts into factory locations, no cutting
• Gold zinc plated, made in the USA

Specifications

• Length: 11-12in
• Rods: 1in OD x .25in wall DOM A513 steel
• Mount studs: 1.25in 4130 steel
• Rod ends: Chromoly steel with self-lubricating race
• Coating: Gold zinc
• Quantity: Pair
• Install time: About 1 hour
• Body modification: None

Fitment

• Jeep Wrangler JL 2018-2023
• Jeep Gladiator JT 2020-2023

For Jeeps equipped with electronic sway bar disconnects. Designed for MetalCloak 2.5in to 5.5in lifts.

In the Box

• Front sway bar end link rods (2)
• Rod ends (4)
• Mount studs (3)
• Capture mount (1)

Notes

• MetalCloak recommends a suspension alignment by a specialist after installing MetalCloak suspension parts.

MPN 7422 · UPC 810191172369