Jeep Wrangler JL 2018-2026 & Gladiator JT 2020-2026, MetalCloak HD Drag Link

Larger tires and aftermarket axles ask more of the drag link than the factory part was built for, and a worn or bent link shows up as wander and a steering wheel that never sits straight.

The MetalCloak HD Drag Link is 1.375in OD by .375in wall DOM tube with high-clearance bends for aftermarket axles and diff covers. Forged 1-ton rod ends use the OE taper pin and lock nut, limit misalignment to stop drag link flop, and take grease through zerk fittings under rubber boots. It works at factory height or lifted, on every JL and JT trim, in under or over knuckle setups.

Bolt it in, center the wheel with the on-vehicle adjuster, and grease the ends at service time.

Key Features

• 1.375in OD x .375in wall DOM tube with high-clearance bends
• Clears aftermarket axles and differential covers
• Forged, heat-treated 1-ton rod ends with OE taper pin and lock nut
• Anti-flop design limits misalignment
• Rubber grease boots and zerk fittings on the ends
• Adjustable on the vehicle
• Gold zinc chromate plating

Specifications

• Tube: 1.375in OD x .375in wall DOM
• Length: 41in
• Ends: Serviceable 1-ton rod ends
• Coating: Gold zinc
• Weight: About 15 lb
• Install time: About 1 hour
• Body modification: None

Fitment

• Jeep Wrangler JL 2018-2026
• Jeep Gladiator JT 2020-2026

Fits stock height and lifted Jeeps, all trim levels, in under or over knuckle steering configurations.

In the Box

• Drag link
• Anti-flop ends

MPN 7643 · UPC 810191172710