Jeep Wrangler JL 2018-2026 & Gladiator JT 2020-2026, MetalCloak Duroflex Control Arms, Lower Front

The lower front arms on a lifted JL or Gladiator set the front axle's position and caster, and stock fixed-length arms cannot be adjusted once the Jeep sits higher. Their rubber bushings also bind at full articulation and send harshness through the steering.

MetalCloak Duroflex Lower Front Control Arms are adjustable for length, built from CNC-formed 1.625in OD DOM steel tube with a 1/4in wall and forged threaded ends that lock down with precision nuts. Patented Duroflex joints at both ends use an elastomer made with DuPont Kevlar fiber that self-centers, damps vibration and allows over 34 degrees of misalignment per joint, with 28 degrees more articulation than typical control arms.

Set the length, bolt them into the factory mounts, align the Jeep, and the front end tracks straight on the highway and flexes on the trail.

Key Features

• CNC-formed 1.625in OD, 1/4in wall DOM steel tubing
• Adjustable length with precision locking nut
• Forged threaded ends
• Patented Duroflex joints at both ends, vulcanized elastomer compounded with DuPont Kevlar fiber
• Self-centering and vibration damping
• Over 34 degrees of misalignment per joint, over 68 degrees per arm
• Low maintenance and rebuildable: clean the bushing and regrease with Teflon-impregnated synthetic silicone grease
• Gold zinc plated for corrosion protection
• Made in the USA

Specifications

• Position: Lower front
• Tubing: 1.625in OD x .25in wall DOM steel
• Joint: Vulcanized elastomer with DuPont Kevlar fiber
• Coating: Gold zinc
• Install difficulty: Easy
• Install time: 1-2 hours
• Body modification: None

Fitment

• Jeep Wrangler JL 2018-2026
• Jeep Gladiator JT 2020-2026

In the Box

• Lower front control arms

Notes

• MetalCloak recommends a suspension specialist align the Jeep after MetalCloak suspension is installed.

MPN 7601 · UPC 810191172413