Click to open expanded view
Jeep Wrangler JL 2018-2026 & Gladiator JT 2020-2026, MetalCloak Drag Link End, Left-Hand Thread, Driver Side Info & Specs
The left-hand thread, driver side end completes the MetalCloak drag link on a Wrangler JL or Gladiator JT. It is a 1-ton forged and heat-treated rod end with the OE bolt taper made for the JL and JT. The zerk fitting and rubber boot make it serviceable, and the anti-flop design lets the rod end move fully side to side while limiting front-to-back play.
Key Features
- Driver side rod end with left-hand thread
- Anti-flop design: full side-to-side range with limited front-to-back movement
- 1-ton forged and heat-treated rod end
- OE bolt taper specific to the JL and JT
- Sealed rubber grease boot
- Serviced through a zerk fitting
- OE taper pin and lock nut for factory-like fitment
Specifications
- Thread: left-hand, 1in-18
- Position: driver side
- Installation difficulty: easy
- Body modification: none
- Install time: 1 hour
Fitment
- Jeep Wrangler JL 2018-2026
- Jeep Gladiator JT 2020-2026
In the Box
- Drag link rod end
- Flange nut
- Jam nut
- Zerk fitting
Notes
- Requires the MetalCloak drag link (P/N 7643); it does not replace the stock drag link or fit other applications.
- An alignment by a professional is recommended after installing MetalCloak suspension.
- Replace the end if it wears excessively.
MPN 7411 · UPC 810191172307
Recommended for You
- Choosing a selection results in a full page refresh.
!