Jeep Wrangler JL 2018-2026 & Gladiator JT 2020-2026, Grimm OffRoad ARB Twin Compressor Mounting Bracket Kit

SKU: GOR10013
In stock and ready for shipping
Price
$259.95
Add To Wishlist
Vehicle Fitment

2020-2026 Jeep Gladiator JT 
2018-2026 Jeep Wrangler JL 
*Fits 3.6L and 2.0L gas engines only. Not Compatible with 4xe, 392, EcoDiesel, and 3.6L if equipped eTorque.

Install Instructions

Install Instructions for Grimm Offroad ARB Twin Compressor Mounting Bracket Kit - JT/JL

Warning: California Residents

WARNING: Cancer and Reproductive Harm -www.p65warnings.ca.gov

Jeep Wrangler JL 2018-2026 & Gladiator JT 2020-2026, Grimm OffRoad ARB Twin Compressor Mounting Bracket Kit Info & Specs

Airing down is easy to plan and hard to do when the compressor rides loose in the cab. Hoses, cables and noise end up in the way before the trail even starts.

Grimm OffRoad's kit mounts the ARB Twin Compressor under the hood behind the left inner fender liner, away from mud and water. The larger bracket mounts the compressor under the brake booster, and the smaller bracket relocates the compressor's two filters to the top of the engine compartment. An aluminum heat shield protects the compressor from engine heat, and the wiring harness puts the on/off switch and air chuck on the left front fender.

Mount the brackets, route the lines and connect the harness. After that, air is a few seconds away at every stop.

Key Features

  • Mounts one ARB Twin Compressor in the engine bay behind the LH inner fender liner
  • Two steel brackets, new compressor lines, rubber hoses for the filters and a braided stainless steel hose to the air chuck
  • Relocates the compressor intake filters to the top of the engine compartment
  • Aluminum heat shield protects the compressor from high engine temperatures
  • Easy access for airing up tires or setting up air lockers; much quieter than cabin-mounted air compressors
  • Simplifies the ARB wiring harness installation

Specifications

  • Weight: 5.15 lb
  • Dimensions: 10 x 8 x 6 in
  • Country of origin: USA

Fitment

  • Jeep Wrangler JL 2018-2026
  • Jeep Gladiator JT 2020-2026

Not compatible with diesel, 392, 4XE or EcoDiesel models, or with right-hand drive models.

In the Box

  • Two steel brackets
  • New compressor lines, including rubber hoses for the filters and a braided stainless steel hose to the compressor's chuck
  • Wiring extender that connects to the compressor's standard harness
  • Aluminum heat shield
  • Fittings, hardware and instructions

Warranty

Limited lifetime warranty.

Notes

  • Compatible out of the box only with the ARB Twin Air Compressor (ARB part CKMTA12)
  • Compatible with Falcon shocks and Evo Mfg/Rebel Off Road coilover kits (installation can be tricky); coilover kits may require the shock reservoir mount to be moved
  • Inner fender compatibility: stock inner fenders, Road Armor Stealth inner fenders and Evo inner fenders


MPN GOR10013 · UPC 840410809905

Overall rating: 4.8 / 5 from 5 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["installation"].

Review highlights

Reviews

Excellent mount

"This is an excellent mount that is not difficult to install. Tucks compressor up and out of the way. Tire clearance is excellent with 37s."

— Aaron S. (5/5)

The online instructions through the

"The online instructions through the bar code were difficult. My cell phone doesn’t respond to the bar codes very well. Then I needed to type the web site into my computer to get a set of instructions large enough to read. I actually relied on the Trailrecon video to do the installation. The system works well and everything fit."

— Dennis C. (4/5)

great way to mount an arb

"this is a very high quality mount! easy to install! great job Grimm OffRoad"

— Jason M. (5/5)

Great Fit

"I recently installed the Grimm Offroad bracket for my dual ARB setup. I have not used either before and the install was on a new '23 JL Wranger with the 3.6 eTorque engine. The fit was tight due to some new cooling lines to the Lithium-Ion batteries that run past the firewall near the brake booster but being careful it did fit. The only hitch I had was I ordered aftermarket flare kits for my fend flares, buy factor clips ahead of time. They are not expensive and fit easily making reinstall a snap. I also recommend removing the flare in the direction recommended as there is a bracket at the rear of the flare that is easily damaged if you are not careful. I would buy this again."

— Edward R. (5/5)

Mr.

"Great product. Mounts air compressor is a spot where it is out of the way. FYI. Wear a pair of gloves while unhooking air line after airing up tires. It is in the engine bay so it is hot!!"

— Jonathan G. (5/5)

Q&A