Jeep Wrangler JL 4-Door 2018-2026, Rock Hard 4x4 Patriot Series Tube Slider Rocker Guards

On a ledge or a boulder, the rocker panel is the first thing to meet the rock, and a dented sill is hard to fix. The factory rails are thin and leave little to stand on when you climb in and out.

The Patriot Series guards weld a 1-3/4in tube step to 2in x 3in steel rails with 3/16in walls, with end caps welded shut against water and dirt. They mount to the pinch seam, the body bolts and through the floor in existing holes, and the shims in the hardware pack line them up under the body. Bolt them on, no fender trimming needed, and the tube takes the hit instead of the body.

Key Features

• Welded tubular step on 2in x 3in steel rails
• Angled up or angled down step (angled down sits 1.5in lower)
• End caps welded shut
• Mounts at the pinch seam, body bolts and floor
• Shims included for alignment
• Bolt-on, no fender trimming

Specifications

• Series: Patriot
• Rail: 2in x 3in steel, 3/16in wall
• Step tube: 1-3/4in, .120 wall
• Brackets: 3/8in steel
• Step out: 3in
• Step down: 4in (Angled Up), 5.5in (Angled Down)
• Finish: black powder coat, semi-smooth and semi-gloss (raw, paintable finish available on request)
• Origin: Made in the USA
• Shipping weight: 100 lb (Angled Up), 112 lb (Angled Down)
• Shipping carton: 72 x 16 x 10 in

Fitment

• Jeep Wrangler JL 4-Door 2018-2026 (not compatible with a body lift)

In the Box

• Driver side and passenger side rocker guards
• Hardware
• Installation instructions

Notes

• Compatible with the 2026 factory front frame braces: unbolt the braces before install and reinstall them after if wanted.
• Not compatible with a body lift.

MPN RH-90104 (Angled Up)

MPN RH-90106 (Angled Down)