Jeep Wrangler JL 4-Door 2018-2026, Falcon SP2 3.5 e-Adjust Piggyback Shock Kit, 0-1.5in Lift, EcoDiesel/4xe/Rubicon 392

Changing shock settings usually means stopping, getting out and reaching under the truck, which nobody wants to do on a steep climb. With the wrong damping, an EcoDiesel, 4xe or Rubicon 392 JL Unlimited rides harder than it needs to or wallows when the trail gets rough.

The Falcon SP2 3.5 e-Adjust piggyback shocks add a 2-position in-cab switch that moves between Soft and a preselected Firm setting. The Firm level is set at the shocks with 8-position micro adjust dials. The piggyback design adds oil and gas capacity to reduce heat.

Mount the shocks for a 0-1.5in lift, run the harness to the switch and set your Firm level. From then on, the change is a flip of the switch.

Key Features

• 2-position in-cab switch toggles between Soft and a preselected Firm setting
• Shock-mounted 8-position micro adjust dials set the Firm level
• Piggyback design adds oil and gas capacity for reduced heat; the gas charge sits in the reservoir to allow maximum travel
• Flows 6x more oil than restrictive reservoir hose designs and avoids the leakage points of banjo and swivel fittings
• Front shock horizontal piggyback reservoir increases tire clearance
• Corner-specific shocks; front lower offset eyelet gives shock body to frame clearance during articulation
• Rear roost guards protect the shock shaft from rocks kicked up by the tires
• EcoDiesel front shocks have a modified reservoir body for proper fitment
• Rear shocks clear the DEF tank and exhaust system while keeping maximum travel
• Cartridge upgrade kits are available separately

Specifications

• Lift range: 0-1.5in

Fitment

• Jeep Wrangler JL Unlimited 4-Door 2018-2026 (EcoDiesel; 4xe with Falcon 4xe Speaker Relocation Kit 36-07-02-100; Rubicon 392)

In the Box

• SP2 3.5 e-Adjust piggyback shocks, set of 4
• e-Adjust control module
• In-cab switch, 2-position
• e-Adjust wire harness extension, shocks
• e-Adjust wire harness extension, power
• Rear roost guards
• Mounting hardware

Notes

• The 4xe requires the Falcon JL 4xe Speaker Relocation Kit (36-07-02-100).

MPN 11-03-35-400-002 · UPC 843885055907