Jeep Wrangler JL 4-Door 2018-2026 & Gladiator JT 2020-2026, MetalCloak True Dual Rate Coils, Front, JL 5.5in, JT 4.5in Lift, Pair

A long-arm JL 4-door or Gladiator on big tires sits tall, and at that height the front coils carry the most weight and see the most droop. Single-rate springs either sag under a full build or ride stiff, and short ones can leave their buckets when the axle hangs.

MetalCloak True Dual Rate Coils lift a JL 4-door 5.5in and a Gladiator 4.5in, with a 24.5in free length that keeps them seated at full droop. Their dual rate design acts like a lowered coil bucket for a stable ride that holds height and resists sagging. Front lower correction pads replace the factory plastic isolators to correct coil bow, and the upper isolators are engine-specific.

Bolt them in, align the Jeep, and the front end holds its stance on the highway and keeps the tires planted on the trail.

Key Features

• Lift: 5.5in on JL 4-door, 4.5in on JT Gladiator
• Sold as a pair
• Long free length keeps the coils in their buckets at full droop
• Dual rate design for stable on and off-road handling and load carrying
• Consistent ride height, resists sagging
• Front lower coil correction pads correct coil bow
• Engine-specific upper coil isolators

Specifications

• Position: Front
• Lift: 5.5in JL 4-door, 4.5in JT
• Free length: 24.5in
• Solid height: 9in
• Material: High-tensile chrome-silicon steel
• Isolators: Thermoset elastomer, Shore 90A polyurethane
• Coating: Black powder coat
• Install difficulty: Easy
• Install time: 1-2 hours
• Body modification: None

Fitment

• Jeep Wrangler JL 4-Door 2018-2026
• Jeep Gladiator JT 2020-2026

In the Box

• Front True Dual Rate coils (2)
• Lower front coil correction pads (2)
• Engine-specific upper coil isolators (2)

Notes

• Not for the JL 2-door.
• True Dual Rate coils are engineered to work with Duroflex control arms and 6Pak or RockSport shocks.
• Do not powder coat True Dual Rate coils. The baking process can change the coil steel and cause a loss of lift, and powder coating voids the coil warranty.
• MetalCloak recommends a suspension specialist align the Jeep after MetalCloak suspension is installed.

MPN 7675 · UPC 810191172826