Click to open expanded view
Jeep Wrangler JL 3.6L 2018-2026, MetalCloak Rear Track Bar Relocation Bracket Info & Specs
On a lifted JL the rear track bar sits at a steep angle, which pushes the axle sideways as the suspension cycles.
The MetalCloak Rear Track Bar Relocation Bracket is CAD formed from 1/4in hot rolled steel plate, gold zinc chromate plated and made in the USA. It raises the track bar mount 3in to correct the geometry and is built for up and down travel with no frame interference when used with the MetalCloak adjustable rear Durotrak track bar. Bolt it in with some drilling and the axle stays centered through the travel.
Key Features
- CAD formed 1/4in hot rolled steel plate
- Bolt-on bracket, no welding
- Raises the rear track bar mount 3in to reduce track bar angle
- Designed for full up-travel and down-travel with no frame interference
- Gold zinc chromate plate
- Made in the USA
Specifications
- Material: 1/4in hot rolled steel plate
- Finish: Gold zinc
- Recommended lift: 3.5in and taller
- Install difficulty: Easy
- Body modification: Some drilling
- Install time: 1-2 hours
Fitment
- Jeep Wrangler JL 2018-2026 (3.6L)
For use with the MetalCloak JL adjustable rear Durotrak track bar.
In the Box
- Rear track bar bracket
- Required hardware
Notes
- Plan for about 2in of added rear bump stop with this bracket.
- An alignment by a suspension specialist is recommended after a MetalCloak suspension is installed.
MPN 7206 · UPC 810191171645
Recommended for You
- Choosing a selection results in a full page refresh.
!