Jeep Wrangler JL 2-Door 2018-2026, Rock Hard 4x4 RHX Series Tube Slider Rocker Guards, Flat Step

Stepping out of a JL with a muddy boot onto a narrow rail is a good way to slip, and every ledge the sill touches is body panel you would rather keep straight.

The RHX Series guards weld a 1-3/4in tube to 2in x 3in steel rails with 3/16in walls and cap them with a flat top plate punched with dimples for traction. They mount to the pinch seam, the body bolts and through the floor in existing holes, and shims in the hardware pack align them under the body. Bolt them on and the step is wide and grippy while the tube takes the rocks.

Key Features

• Flat top plate with dimple punches for traction
• Tubular steel on 2in x 3in rails
• End caps welded shut
• Mounts at the pinch seam, body bolts and floor
• Shims included for alignment
• Bolt-on, no fender trimming

Specifications

• Series: RHX, flat step
• Rail: 2in x 3in steel, 3/16in wall
• Tube: 1-3/4in, .120 wall
• Brackets: 3/8in steel
• Finish: black powder coat, semi-smooth and semi-gloss (raw, paintable finish available on request)
• Origin: Made in the USA
• Shipping weight: 90 lb
• Shipping carton: 58 x 16 x 11 in

Fitment

• Jeep Wrangler JL 2-Door 2018-2026 (not compatible with a body lift)

In the Box

• Driver side and passenger side rocker guards
• Hardware
• Installation instructions

Notes

• Compatible with the 2026 factory front frame braces: unbolt the braces before install and reinstall them after if wanted.
• Not compatible with a body lift.

MPN RH-90122