Lifts over 3 Inch ask more of the control arms, and axle location and pinion angle need adjustment.
The Synergy 3.0 Inch Stage 3 System adds adjustable upper control arms to the Stage 2 lineup. Those arms locate the front and rear axles and set the pinion angle when aftermarket 1310-1350 driveshafts are used.
The system fits 35 Inch tires with stock fenders, or 37 Inch with high fenders.
Key Features
- Fits 35 Inch tires (37 Inch with high fenders)
- Front and rear track bar relocation brackets, flipped drag link and adjustable upper control arms
- Lower control arms made from 1-3/4 Inch x 0.188 Inch wall 1026 DOM tubing to correct caster and increase durability
- Synergy Dual Durometer Bushings (DDB) with a Teflon bearing surface
- Front and rear lower shock mounts
- Front and rear sway bar links
- Extended stainless steel braided brake lines, front and rear
- Synergy double adjuster sleeve and pinch bolt assembly adjusts control arm, track bar, tie rod and drag link length without removal
- Optional front sway bar disconnect system
- Progressive wound coil springs made with CNC hot winding
- Powder coated components for corrosion resistance
Includes
- 1 x Front Lift Springs, 3.0 Inch (8063-30)
- 1 x Rear Lift Springs, 3.0 Inch (8064-30)
- 1 x Bump Stop Spacer Kit (2-4 Inch), Pair (8057-10)
- 1 x Rear Bump Stop Spacer, 3 Inch (8858-30)
- 1 x Rear Sway Bar Links, Pair (8060-11)
- 1 x Front Sway Bar Links, Pair (8059-11)
- 1 x Extended Front and Rear DOT Approved Brake Line Kit (8066)
- 1 x 3 Inch+ Lift Bolt On Rear Track Bar Bracket (8056)
- 1 x Front Track Bar Bracket (8055)
- 1 x High Clearance Adjustable Rear Lower Control Arms, Pair (8052)
- 1 x High Clearance Adjustable Front Lower Control Arms, Pair (8051)
- 1 x Adjustable Front Upper Control Arms, Pair (8053)
- 1 x Rear Lower Shock Mount Kit (8074)
- 1 x Front Lower Shock Mount Bracket (8073)
- 1 x Rear Coil Wedges (8097)
- 1 x Adjustable Rear Upper Control Arms, Pair (8854-01)
- 1 x HD Drag Link (8000-01)
Fitment
- Jeep Wrangler JKU 4-Door 2007-2018
Notes
- 2012+ JK models lifted over 2 Inch require exhaust spacers (5017) or a front aftermarket driveshaft to prevent interference with the exhaust
- Aftermarket driveshafts are recommended for lifts of 3 Inch and up
- Springs are designed to provide the advertised amount of lift with aftermarket bumpers, winches and tire carriers installed. More lift occurs on vehicles in stock trim
- Springs retain the factory rake, with the rear higher than the front, so the vehicle sits level when loaded. One size shorter rear springs can be requested to level the vehicle when unloaded
- Requires a wheel diameter of 16 Inch or larger
- Requires a maximum 4-3/4 Inch backspace wheel or wheel spacer with a factory wheel setup. 4-1/2 Inch backspacing is recommended
MPN 8043-30