A 2.0 Inch lift moves the axles off center, and the handling can suffer.
The Synergy Stage 1 System adds a front adjustable track bar and a rear track bar relocation bracket to the 2.0 Inch lift springs. They center the front and rear axles and raise the rear roll center height.
The system fits 33 Inch tires with stock fenders, or 35 Inch with high fenders, and is available for right hand drive vehicles.
Key Features
- Fits 33 Inch tires (35 Inch with high fenders)
- Front adjustable track bar and rear track bar relocation bracket
- Rear track bar relocation bracket raises the track bar mounting position, increasing roll center height
- Control arm cam bolt kit to correct caster
- Rear sway bar links let the factory rear links be used in the front
- Front and rear brake line relocation kits
- Front and rear bump stop extension kits
- Powder coated components for corrosion resistance
- Progressive wound coil springs made with CNC hot winding keep the spring from coming unbound at full suspension droop
- Bolt-on installation with basic hand tools
- Modular design, with all components available separately
Includes
- 1 x Front Lift Springs, 2.0 Inch (8063-20)
- 1 x Rear Lift Springs, 2.0 Inch (8064-20)
- 1 x Bump Stop Spacer Kit (2-4 Inch), Pair (8057-10)
- 1 x Rear Bump Stop Spacer, 2 Inch (8858-20)
- 1 x Rear Sway Bar Links, Pair (8060-11)
- 1 x Front Brake Line Relocation Kit (8083)
- 1 x Rear Brake Line Relocation Kit (8084)
- 1 x Control Arm Cam Bolt Kit (8004)
- 1 x 2-3 Inch Lift Bolt On Rear Track Bar Bracket (8076)
- 1 x Front Track Bar (8075-02)
Fitment
- Jeep Wrangler JKU 4-Door 2007-2018
Notes
- Front and rear shock mounting brackets (8019) are required when using factory shocks and are not compatible with aftermarket shocks. Using factory shocks requires a cut-off wheel to remove the rear stock lower shock mounts
- Springs are designed to provide the advertised amount of lift with aftermarket bumpers, winches and tire carriers installed. More lift occurs on vehicles in stock trim
- Springs retain the factory rake, with the rear higher than the front, so the vehicle sits level when loaded. One size shorter rear springs can be requested to level the vehicle when unloaded
- Requires a maximum 4-3/4 Inch backspace wheel or wheel spacer with a factory wheel setup. 4-1/2 Inch backspacing is recommended
- RHD means Right Hand Drive. RHD versions are listed under separate -RHD part numbers
MPN 8041-20