Wheeling wears out control arm and track bar hardware, and a lifted Jeep puts even more load on every bolt.
The complete G9 kit gathers the lower control arm and track bar hardware and the upper control arm hardware in one box, built around high strength bolts and hardened washers.
One order covers every control arm and rear track bar bolt, with a 14mm front track bar bolt for 2012+ models.
Key Features
- High strength hardware
- Replaces the lower and upper control arm hardware and the specialized nut tabs that get destroyed from wheeling abuse
- Replaces the rear track bar bolts, which often wear out from service
- Replaces the front track bar frame side bolt on 2012+ JK models with a 14mm bolt
- Hardened, extra thick washers that do not deform or contort like standard washers
Includes
- 1 x G9 Lower Control Arm and Track Bar Hardware Kit (P/N 8050)
- 1 x G9 Upper Control Arm Hardware Kit (P/N 8050-01)
- 8 x 9/16-18 UNF x 4.0 Inch long bolts (lower control arms)
- 4 x 9/16-18 UNF x 3.0 Inch long bolts (track bars)
- 4 x 9/16-18 UNF x 3.50 Inch long bolts (rear upper control arms)
- 4 x M12 x 1.50 x 85mm (3.50 Inch) long bolts (front upper control arms)
- 2 x rear upper control arm nut tab, frame side
- 2 x rear upper control arm nut tab, axle side
Fitment
- Jeep Wrangler JK 2007-2018
MPN 8050-02