Jeep Wrangler JK 2007-2018, RockJock High Steer Front Trac Bar & Steering Stabilizer Shock Relocation Bracket, for JL/JT Trac Bar

A JK high steer build that uses the longer JL/JT trac bar needs a bracket drilled for it. This RockJock axle bracket raises the trac bar mounting hole 2 inches, with a hole sized for the longer JL/JT bar, and moves the stabilizer shock anchor up behind the raised tie rod. The longer bar is mandatory, because it keeps the components nested together for maximum up-travel. Bolt the bracket to the axle, fit the JL/JT trac bar and a compatible stabilizer shock, and the geometry follows the high steer knuckles.

Key Features

• Raises the trac bar mounting hole 2 in to prevent bump steer
• Hole accommodates the longer JL/JT front trac bar (RJ-9120FJLF), which is mandatory
• Moves the stabilizer shock mount well above stock, behind the raised tie rod
• Bolts onto the factory axle

Specifications

• Location: front
• Sold as: each
• Shipping weight: 4 lb
• Shipping carton: 6 x 6 x 6 in

Fitment

• Jeep Wrangler JK 2-Door 2007-2018
• Jeep Wrangler JK Unlimited 4-Door 2007-2018

For vehicles with the factory front differential (Dana 30 or Dana 44), used with RockJock High Steer Knuckles.

In the Box

• Trac bar and stabilizer shock relocation bracket (forward and rearward brackets)
• Hardware
• Step-by-step instructions

Notes

• Requires a factory JL/JT stabilizer shock or the Bilstein B8 5100 series stock replacement shock, part 33-292984.
• The stabilizer shock tie rod clamp bracket kit (RJ-441002-101) is recommended to relocate the other end of the shock.
• Does not work with twin tube and thru-rod dampers.
• Clears an original differential cover. Aftermarket differential covers may need clearancing, and some may not work.
• Bracket for the factory or aftermarket JK trac bar is RJ-431110-103.

MPN RJ-431111-103 · UPC 810038158730