Jeep Wrangler JK 2007-2018, RockJock Currectlync High Steer Outer Steering Knuckles, Gloss Black

A lifted JK with big tires runs its tie rod and drag link low, where rocks take hits meant for the tires. Moving the steering up means more than raising a part, because every angle that follows shifts with it. These RockJock Currectlync knuckles raise the tie rod and drag link 2 3/4 inches and push the tie rod slightly outward, which allows a tighter JL/JT-style steering angle than the stock JK or 1 ton axles. They are iron castings with a gloss black finish and install like the factory part. Fit them on a factory axle, add the matching RockJock high steer parts, and set the geometry. Hydraulic assist or a stabilizer shock goes in at the higher position.

Key Features

• Raises the tie rod and drag link 2 3/4 in
• Pushes the tie rod outward, away from the axle, for a tighter steering angle than stock JK and 1 ton axles
• Iron castings with a gloss black finish and precise machining
• Adjustable steering stops ahead of the axle give fore and aft stops on both wheels
• Retains factory ball joints, unit bearings, outer axles, brakes and dust shields
• Bolt-on installation

Specifications

• Material: iron castings
• Finish: gloss black
• Minimum wheel diameter: 17 in; wheel backspacing up to 6 in
• Minimum bump stop extension: 2.2 in
• Sold as: kit
• Country of origin: US
• Shipping weight: 32 lb
• Shipping carton: 12 x 12 x 10 in

Fitment

• Jeep Wrangler JK 2-Door 2007-2018
• Jeep Wrangler JK Unlimited 4-Door 2007-2018

For vehicles with the factory front differential (Dana 30 or Dana 44) or an aftermarket axle with factory-spec inner C-knuckles.

In the Box

• Left side high steer steering knuckle
• Right side high steer steering knuckle
• 4 steering stop bolts
• 4 steering stop bolt jam nuts
• 4 ball joint cotter pins
• Step-by-step instructions

Notes

• A minimum 2.2 in bump stop extension is mandatory to keep components from crashing at full articulation.
• Designed to be used with other RockJock high steer components and the JK-9704 steering system. Fit with other tie rods and drag links is untested.

MPN RJ-437100-101 · UPC 810038158709