Jeep Wrangler JK 2007-2018, MetalCloak Heavy Duty Front Sway Bar Link Kit, 11-12in, Electronic Disconnect

A lifted JK with the factory electronic sway bar disconnect still needs end links that reach and hold up. Short or rubber-bushed links bind the bar at full articulation, and they wear out fast with bigger tires.

These MetalCloak heavy duty links stretch to 11-12in and keep the factory electronic disconnect working. The rods are 1in OD by .25in wall DOM steel with machined wrench flats and double adjustment, and spherical rod ends with a self-lubricating race replace the rubber bushings for longer service life. They bolt into the factory locations with no cutting and suit MetalCloak 2.5in to 4.5in mid arm lifts.

Install takes about an hour. Set the length, torque the studs, and the bar does its job on road and off.

Key Features

• 11-12in extended length for lifted JKs
• Keeps the factory electronic sway bar disconnect
• 1in OD x .25in wall DOM steel rods, double adjustable
• Hard chrome plated spherical rod ends with a self-lubricating race
• 3/4in mounting pins
• Bolts into factory locations, no cutting
• Gold zinc finish, made in the USA

Specifications

• Length: 11-12in
• Rods: 1in OD x .25in wall DOM A513
• Rod ends: Spherical, self-lubricating race
• Coating: Gold zinc
• Quantity: Pair
• Install time: About 1 hour
• Body modification: None

Fitment

• Jeep Wrangler JK 2007-2018

For JKs equipped with the electronic sway bar disconnect. Designed for MetalCloak 2.5in to 4.5in mid arm lifts.

In the Box

• Front sway bar rods (2)
• Rod ends (4)
• Mount studs (3)
• Capture mount (1)

Notes

• Too long for a JK on a 2in leveling kit; that setup needs links of roughly 6-8in.

MPN 7420 · UPC 810191172345