Jeep Wrangler JK 2007-2018, MetalCloak HD Steering System, Fox Edition

Pair a stronger tie rod and drag link with a stabilizer tuned for the platform and the steering gets a full refresh in one box. The Fox Edition includes a chromoly tie rod, a high-clearance drag link and a Fox stabilizer with increased compression and extension damping. Both bars use 1-ton forged, heat-treated rod ends that sit sealed in rubber boots and adjust while the parts stay installed. The dog-leg ends control tie rod flop, and the OE taper pin and lock nut keep fitment exact. A billet tie rod mount and a heavy duty 3/16in adjustable bracket place the stabilizer at the factory location.

Key Features

• Tubular 1.625in OD, 0.375in wall chromoly tie rod
• Drag link with 1-ton forged, heat-treated rod ends and gold zinc chromate finish
• Dog-leg rod end design controls tie rod flop
• OE taper pin and lock nut for exact fitment
• Rod ends sealed with rubber grease boots
• Billet tie rod mount
• Heavy duty 3/16in adjustable stabilizer mount bracket at the factory location
• Fox stabilizer with increased compression and extension damping, tuned for the JK

Specifications

• Tie rod: 1.625in OD x 0.375in wall chromoly
• Rod ends: 1-ton forged and heat treated, 1in dog-leg
• Drag link tubing: 1.375in OD with high-clearance bends for aftermarket axles and differential covers
• Finish: gold zinc chromate
• Billet mount: two-piece aluminum, anodized black, laser-engraved M

Fitment

• Jeep Wrangler JK 2007-2018

Notes

• Works with left-hand drive applications only.
• Does not work with stock wheel backspacing.
• A raised steering stabilizer needs at least 2in of bump stop to clear the frame.
• Use anti-seize on every bolt when the billet tie rod mount is installed.
• The billet stabilizer mount also suits any 1.625in OD tie rod on the JK, JL and Gladiator JT.

MPN 7134-F