Jeep Wrangler JK 2007-2018, MetalCloak HD Control Arm Pro'lignment Kit

Lift a JK and the front control arms tilt, which hurts caster and makes the front end dive under braking. These drop brackets flatten the arm angles and correct caster for lifts of 2.5in, 3.5in and 4.5in, with multiple hole locations to match your lift height. Each bracket is a fully welded, gusseted and boxed one-piece unit of 3/16in hot-rolled steel that bolts into the factory locations. They accept factory non-adjustable arms or aftermarket adjustable arms, so cam bolts are not needed. Installation takes about 2 hours. Select the hole position that matches your lift.

Key Features

• Flattens control arm angles and corrects caster
• Improved braking performance with less front-end dive
• Fully welded, gusseted and boxed one-piece 3/16in hot-rolled steel plate
• Multiple hole locations for lift heights from 2.5in to 4.5in
• Bolts directly into the factory locations
• Gold zinc plated
• Made in the USA

Specifications

• Material: 3/16in hot-rolled steel plate
• Finish: gold zinc
• Install time: 2 hours

Fitment

• Jeep Wrangler JK 2007-2018

In the Box

• Control arm Pro'lignment brackets
• Bracket spacers
• Mounting hardware

Notes

• When using adjustable arms with the brackets, set the arms at factory length first and fine tune during the alignment.
• MetalCloak recommends alignment by a suspension specialist after a MetalCloak suspension is installed.

MPN 7073 · UPC 850021477127