Jeep Wrangler JK 2007-2018, MetalCloak Dog-Leg Tie Rod End, Right Hand Thread, Driver Side

Dog-leg tie rod ends give wheels room to turn, and this one is the driver side replacement for the MetalCloak JK tie rod, with a right-hand thread. The housing is a 1-ton forged and heat-treated piece with an oversized 1in thread, an OE taper pin and a lock nut. Its shape clears stock or aftermarket wheels at full turning radius, and the anti-flop feature allows bind-free side-to-side motion. A rubber boot and zerk fitting keep it sealed and serviceable. Installation takes about 1 hour.

Key Features

• Right-hand thread, driver side
• 1-ton forged and heat-treated rod end
• Dog-leg shape for clearance with stock or aftermarket wheels at full turning radius
• Anti-flop feature for bind-free side-to-side motion and limited front-to-back movement
• JK-specific OE bolt taper
• Sealed with a rubber grease boot, serviceable through a zerk fitting

Specifications

• Rating: 1-ton
• Thread: right hand
• Threads: oversized 1in
• Serviceable: zerk fitting
• Install time: 1 hour

Fitment

• Jeep Wrangler JK 2007-2018

In the Box

• Dog-leg tie rod end
• Castle nut
• Jam nut
• Zerk fitting
• Cotter pin

Notes

• Works only with the MetalCloak tie rod. The ends are specific to MetalCloak bars.
• The jam nut takes a 1-7/16in wrench, and the bar has 1-1/2in flats.
• MetalCloak recommends alignment by a suspension specialist after a MetalCloak suspension is installed.

MPN 7408 · UPC 810191172277