Jeep Wrangler JL 2018-2026, TeraFlex 3in-Stroke SpeedBump and Progressive Bump Stop Kit, Front and Rear, 4.5in Lift

At 4.5 in of lift the factory bump stops are far from where they need to be. The axle can slam the frame at full compression and nobody wants to find out what bends first.

This kit pairs 3 in-stroke SpeedBump front stops, built on a self-lubricating Delrin acetal resin shaft with an external shaft seal, with foam progressive rear stops that run 1.5 in longer than stock. Lower strike pads, spacers and shims set the stopping point for the taller stance.

Take off the factory bump stop bell, bolt on the front stops and pads, and pop in the rear ones. Full-compression hits get a controlled stop instead of a crash.

Key Features

• Front SpeedBump stops with a self-lubricating Delrin acetal resin polymer shaft
• External shaft seal wipes the shaft and keeps contaminants out
• Rear foam progressive stops are 1.5 in longer than stock
• Maintenance-free, no tuning required
• Bolt-on front stops and strike pads; rear stops pop in

Specifications

• Lift height: 4.5 in
• Front stop stroke: 3 in

Fitment

• Jeep Wrangler JL 2018-2026 (2-door and 4-door)

In the Box

• 3 in-stroke SpeedBump front bump stop kit
• 1.25 in SpeedBump bump stop pad kit, front lower (3 pair)
• 0.25 in adjustment spacers (2 pair)
• Foam progressive bump stops, rear pair
• 2 in bump stop strike pads, rear pair
• 0.5 in bump stop strike pad shims, rear (4 pair)
• Rear bump stop bracket mounting plate and strap, pair
• All necessary hardware

MPN 1958350 · UPC 843885046226