Jeep Wrangler JK 2007-2018 & JL 2018-2026, Quake LED 39in LED Rear Cargo Interior Light Bar Kit

With the rear seat in place, the stock dome light barely reaches the cargo area of a Wrangler, so loading gear or finding a tool at camp turns into a flashlight job.

The Quake LED 39in interior light bar mounts along the lower rear window with 3M UHB adhesive and bends to follow the glass. It puts out 1,500 lumens from 57 SMD diodes at 15 watts. A metal push-button switch controls it, or it can be wired into the stock dome light.

Stick it down, route the wiring, and light the cargo area on demand.

Key Features

• Flexible bar bends to match the rear window contour
• Dual trigger input: push-button switch or hard wire to the stock dome light
• Disconnects without tools when the top is removed
• CNC metal push-button switch with LED halo ring
• Complete harness with fuse

Specifications

• Length: 39 in (39 x 1.2 x 0.25 in)
• Lumens: 1,500
• Power: 15 W, 57 high intensity SMD 5050 diodes
• Color temperature: 6000K
• Input voltage: 12V DC
• Amp draw: 0.4 A (dome setting), 0.55 A (switched on)
• Waterproof rating: IP65 (bar and switch)
• Lifespan: 10,000 hours
• Operating temperature: -40 to 140 degrees F
• Light bar wire: 60 in; harness wire: 70 in
• Bar weight: 0.6 lb
• Shipping weight: 1.66 lb
• Shipping carton: 1.97 x 47.25 x 1.97 in

Fitment

• Jeep Wrangler JK 2007-2018 (2-door and 4-door)
• Jeep Wrangler JL 2018-2026 (2-door and 4-door)

In the Box

• 39in rear window LED interior light bar
• Wire harness with switch and 5A fuse
• 3M UHB adhesive tape
• 12 cable zip ties
• 5 black and 5 white window wire mount clips
• 3 T-tap quick connectors
• 10 in wire loom
• Installation instructions

Notes

• Installation level: beginner, about 1 hour.
• Tools needed: pliers, flathead screwdriver, Torx drivers, drill and 3/4 in drill bit.

MPN QTE753 · UPC 718193344084