Jeep Wrangler JK 4-Door 2007-2018, Falcon SP2 2.1 Monotube Shock Kit, 4-6in Lift

A JK with a 4 to 6in lift needs shocks that match the travel, and not everyone wants to adjust them on the trail. The Falcon SP2 2.1 monotube kit is a compact setup tuned for on-road and off-road driving, with SP2 mode adjust that sets compression and rebound to Soft or Performance when the shocks are installed. The shock body is 6061-T6 aluminum with a smooth honed interior, and the shocks are built corner-specific for the JK. Install them, pick a mode, and drive. The lifted JK stays composed on pavement and on the trail.

Key Features

• SP2 mode adjust: choose Soft or Performance mode at install; tunes compression and rebound
• Corner-specific JK shocks; front upper offset stud for frame clearance; outboard mounting for clearance with raised track bar brackets
• Rear shock body positioned at the bottom to protect the shaft from rocks
• 6061-T6 aluminum alloy shock body
• Smooth honed internal shock body surface
• Improved dynamic roll control and low-speed damping
• Induction hardened chrome plated shaft resists rock damage, corrosion and shaft buckling
• 1-piece energized Teflon bronze piston wear band
• VOD (Volume Optimized Damping) digressive linear piston for quicker ramp-up; reduces bottoming at full compression or over uneven terrain
• OGS (oil/gas separator) prevents cavitation

Fitment

• Jeep Wrangler JK 4-Door 2007-2018

For vehicles with 4 to 6in of lift.

In the Box

• 4 SP2 2.1 monotube shocks
• All necessary hardware

Notes

• Rear shock skid plates are available separately.

MPN 03-02-21-400-406 · UPC 843885049937