On a 2012-2018 JK Unlimited with an automatic transmission, a lift changes the length and angle of the rear driveshaft. This heavy duty shaft is a constant velocity design made for MetalCloak suspension systems, with a 2.5in outer diameter that gives more clearance at the cross member and exhaust and a thicker tube wall than stock. It is pre-balanced and pre-measured for the lift height, and its slip shafts are serviceable with internal seals. The shaft bolts in and replaces the yoke at the transfer case, with all required hardware included.
Key Features
- 2.5in OD for more clearance
- Pre-balanced and pre-measured, built to the correct length for each lift height
- Serviceable slip shafts with internal seals instead of accordion boots
- Double cardan 1310 universal joints with zerk fittings
- Used with MetalCloak 2.5in to 5.5in lift kits
- Made in the USA
Specifications
- Outer diameter: 2.5in
- U-joints: 1310 series double cardan
- Finish: black paint
- Installation: bolt-in, replaces the yoke at the transfer case
- Install time: 3 to 4 hours
Fitment
- Jeep Wrangler JK 4-Door (Automatic Transmission) 2012-2018
In the Box
- Rear driveshaft
- Replacement yoke
- All required hardware
Notes
- Adjustable rear control arms are needed to set the pinion angle for the CV
- Uses standard Spicer 1310 U-joints
MPN 7205 · UPC 810191171638