Stock-length control arms limit flex and ride quality once a Jeep is lifted to 4.0 Inch.
The Synergy 4.0 Inch Stage 4 Long Arm System carries over the Stage 3 parts and swaps the standard length control arms for adjustable long arms and long arm mounting brackets. The install is 100 percent bolt-on, with no welding required.
It fits 37 Inch tires with stock fenders, or 40 Inch with high fenders, and is available for right hand drive vehicles.
Key Features
- Fits 37 Inch tires (40 Inch with high fenders)
- Adjustable upper and lower long arms with long arm mounting brackets, 100 percent bolt-on with no welding required
- Front and rear track bar relocation brackets and a flipped drag link
- Lower control arms made from 2 Inch x 0.250 Inch wall 1026 DOM tubing
- Synergy Dual Durometer Bushings (DDB) with a Teflon bearing surface
- Front and rear lower shock mounts
- Front and rear sway bar links
- Extended stainless steel braided brake lines, front and rear
- Synergy double adjuster sleeve and pinch bolt assembly adjusts control arm, track bar, tie rod and drag link length without removal
- Optional front sway bar disconnect system
- Progressive wound coil springs made with CNC hot winding
- Powder coated components for corrosion resistance
Includes
- 1 x Front Lift Springs, 4.0 Inch (8063-30)
- 1 x Rear Lift Springs, 4.0 Inch (8064-30)
- 1 x Bump Stop Spacer Kit (2-4 Inch), Pair (8057-10)
- 1 x Rear Bump Stop Spacer, 4 Inch (8858-40)
- 1 x Rear Sway Bar Links, Pair (8060-11)
- 1 x Front Sway Bar Links, Pair (8059-11)
- 1 x Extended Front and Rear DOT Approved Brake Line Kit (8066)
- 1 x 3 Inch+ Lift Bolt On Rear Track Bar Bracket (8056)
- 1 x Rear Track Bar (8062)
- 1 x Front Track Bar Bracket (8055)
- 1 x Rear Control Arm Frame Bracket, Pair (8030)
- 1 x Front Control Arm Frame Bracket, Pair (8031)
- 1 x Front High Clearance Long Arm Lower Control Arms, Pair (8033)
- 1 x Front Long Arm Upper Control Arms, Pair (8035)
- 1 x Rear High Clearance Long Arm Lower Control Arms, Pair (8036)
- 1 x Rear Long Arm Upper Control Arms, Pair (8038)
- 1 x Rear Lower Shock Mount Kit (8074)
- 1 x Front Lower Shock Mount Bracket (8073)
- 1 x Rear Coil Wedges (8097)
- 1 x HD Drag Link (8000-01)
- 1 x Front Track Bar (8075-02)
Fitment
- Jeep Wrangler JK 2-Door 2007-2018
Notes
- Diesel models require a set of spacers to be fabricated for installation. The transmission cross member sits further back on diesel models, so the front long arm brackets do not sit flush to the cross member
- Springs retain the factory rake, with the rear higher than the front, so the vehicle sits level when loaded. One size shorter rear springs can be requested to level the vehicle when unloaded
- RHD means Right Hand Drive. RHD versions are listed under separate -RHD part numbers
MPN 8024-40