At 4.0 Inch of lift, the axles need to be located and centered under the Jeep again.
The Synergy 4.0 Inch Stage 3 System swaps the fixed length lower control arms for adjustable lower arms and adds adjustable upper arms and adjustable track bars at the front and rear. The track bars center the axles at the increased ride height.
It fits 37 Inch tires with stock fenders, or 40 Inch with high fenders.
Key Features
- Fits 37 Inch tires (40 Inch with high fenders)
- Adjustable upper and lower control arms, front and rear, plus front and rear adjustable track bars
- Front and rear track bar relocation brackets and a flipped drag link
- Lower control arms made from 1-3/4 Inch x 0.188 Inch wall 1026 DOM tubing to correct caster and increase durability
- Synergy Dual Durometer Bushings (DDB) with a Teflon bearing surface
- Front and rear lower shock mounts
- Front and rear sway bar links
- Extended stainless steel braided brake lines, front and rear
- Synergy double adjuster sleeve and pinch bolt assembly adjusts control arm, track bar, tie rod and drag link length without removal
- Optional front sway bar disconnect system
- Powder coated components for corrosion resistance
Includes
- 1 x Front Lift Springs, 4.0 Inch (8063-30)
- 1 x Rear Lift Springs, 4.0 Inch (8064-30)
- 1 x Bump Stop Spacer Kit (2-4 Inch), Pair (8057-10)
- 1 x Rear Bump Stop Spacer, 4 Inch (8858-40)
- 1 x Rear Sway Bar Links, Pair (8060-11)
- 1 x Front Sway Bar Links, Pair (8059-11)
- 1 x Adjustable Rear Upper Control Arms, Pair (8854-01)
- 1 x Extended Front and Rear DOT Approved Brake Line Kit (8066)
- 1 x 3 Inch+ Lift Bolt On Rear Track Bar Bracket (8056)
- 1 x Rear Track Bar (8062-02)
- 1 x Front Track Bar Bracket (8055)
- 1 x High Clearance Adjustable Front Lower Control Arms, Pair (8051)
- 1 x High Clearance Adjustable Rear Lower Control Arms, Pair (8052)
- 1 x Adjustable Front Upper Control Arms, Pair (8053)
- 1 x Rear Lower Shock Mount Kit (8074)
- 1 x Front Lower Shock Mount Bracket (8073)
- 1 x Rear Coil Wedges (8097)
- 1 x HD Drag Link (8000-01)
- 1 x Front Track Bar (8075-02)
Fitment
- Jeep Wrangler JK 2-Door 2007-2018
Notes
- 2012+ JK models lifted over 2 Inch require exhaust spacers (5017) or a front aftermarket driveshaft to prevent interference with the exhaust
- Aftermarket driveshafts are recommended for lifts of 3 Inch and up
- Springs are designed to provide the advertised amount of lift with aftermarket bumpers, winches and tire carriers installed. More lift occurs on vehicles in stock trim
- Springs retain the factory rake, with the rear higher than the front, so the vehicle sits level when loaded. One size shorter rear springs can be requested to level the vehicle when unloaded
- Requires a wheel diameter of 16 Inch or larger
- RHD means Right Hand Drive. RHD versions are listed under separate -RHD part numbers
MPN 8023-40