Once a Jeep is lifted, the factory lower control arms are the weak link on rocky trails.
The Synergy Stage 2 System is the first in the line to include lower control arms. It carries the Stage 1.5 parts and adds heavy duty lower control arms at the front and rear, which correct caster and are adjustable for low maintenance.
The system fits 35 Inch tires with stock fenders, or 37 Inch with high fenders, and needs a wheel diameter of 16 Inch or larger.
Key Features
- Fits 35 Inch tires (37 Inch with high fenders)
- Front and rear track bar relocation brackets, flipped drag link and heavy duty fixed length lower control arms
- Lower control arms made from 1-3/4 Inch x 0.188 Inch wall 1026 DOM tubing to correct caster and increase durability
- Synergy Dual Durometer Bushings (DDB) with a Teflon bearing surface
- Front and rear lower shock mounts
- Front and rear sway bar links
- Extended stainless steel braided brake lines, front and rear
- Synergy double adjuster sleeve and pinch bolt assembly adjusts control arm, track bar, tie rod and drag link length without removal
- Optional front sway bar disconnect system
- Progressive wound coil springs made with CNC hot winding
- Powder coated components for corrosion resistance
Includes
- 1 x Front Lift Springs, 3.0 Inch (8063-20)
- 1 x Rear Lift Springs, 3.0 Inch (8064-20)
- 1 x Bump Stop Spacer Kit (2-4 Inch), Pair (8057-10)
- 1 x Rear Bump Stop Spacer, 3 Inch (8858-30)
- 1 x Rear Sway Bar Links, Pair (8060-11)
- 1 x Front Sway Bar Links, Pair (8059-11)
- 1 x 3 Inch+ Lift Bolt On Rear Track Bar Bracket (8056)
- 1 x Extended Front and Rear DOT Approved Brake Line Kit (8066)
- 1 x Front Track Bar Bracket (8055)
- 1 x High Clearance Adjustable Rear Lower Control Arms, Pair (8052)
- 1 x High Clearance Adjustable Front Lower Control Arms, Pair (8051)
- 1 x Rear Lower Shock Mount Kit (8074)
- 1 x Front Lower Shock Mount Bracket (8073)
- 1 x Rear Coil Wedges (8097)
- 1 x HD Drag Link (8000-01)
Fitment
- Jeep Wrangler JK 2-Door 2007-2018
Notes
- 2012+ JK models lifted over 2 Inch require exhaust spacers (5017) or a front aftermarket driveshaft to prevent interference with the exhaust
- Aftermarket driveshafts are recommended for lifts of 3 Inch and up
- When a rear aftermarket driveshaft is used with the Stage 2 system, rear adjustable upper control arms must also be used to correct the rear pinion angle
- Springs are designed to provide the advertised amount of lift with aftermarket bumpers, winches and tire carriers installed. More lift occurs on vehicles in stock trim
- Springs retain the factory rake, with the rear higher than the front, so the vehicle sits level when loaded. One size shorter rear springs can be requested to level the vehicle when unloaded
- Requires a wheel diameter of 16 Inch or larger
MPN 8022-30