Jeep Wrangler JK 2-Door 2007-2018, Rock Hard 4x4 Patriot Series Tube Slider Rocker Guards

Rocker panels on a 2-Door JK take the hit on every ledge and boulder, and the factory rails are thin and offer little to stand on when climbing in and out.

These Patriot Series guards replace the factory rails with 2in x 3in steel rails at a 3/16in wall and weld on a 1-3/4in tube that works as a step and a steel cushion against the rocks. The end caps are welded shut, the body mount brackets are 3/8in steel, and shims in the hardware pack line everything up. Pick the angled up step, or the angled down step that sits 1.5in lower.

Bolt them in with no welding and no fender trimming, and the sills are covered with a step ready at every door.

Key Features

• Replaces the factory Rubicon rails
• Welded tubular step keeps the body off the rocks
• Angled Down step sits 1.5in lower than Angled Up
• End caps welded shut against water and dirt
• Mounts to the pinch seam and to the body bolts with wide tabs
• Shims included to align the sliders
• Tapered to follow the body lines
• Bolt-on, no welding and no fender trimming

Specifications

• Mounting rails: 2in x 3in steel, .188in (3/16in) wall
• Body mount brackets: 3/8in thick steel, welded
• Step tube: 1-3/4in, .120in wall
• Step-out from the door: 3.5in
• Door cutout to top of rail: 3in (Angled Up), 4in (Angled Down)
• Tube position: 0.5in above the rail (Angled Up), 0.5in below the rail (Angled Down)
• Tire clearance: up to 38in without modification
• Longer bolts: 12mm x 1.75 x 120mm
• Finish: black powder coat, semi-smooth semi-gloss
• Made in the USA
• Shipping weight: 90 lb
• Shipping carton: 58 x 16 x 11 in

Fitment

• Jeep Wrangler JK 2-Door 2007-2018 (not compatible with a body lift)

In the Box

• Driver and passenger side tube slider rocker guards
• Hardware
• Installation instructions

Notes

• Not compatible with a body lift.
• A raw, paintable finish is available on request.

MPN RH-6008 (Angled Up)

MPN RH-6010 (Angled Down)