Jeep Gladiator JT 2020-2025, TeraFlex 3.5in Alpine RT3 Outback Overland Short Arm Extended Travel Suspension System

A Gladiator that carries a loaded bed, a rooftop tent and recovery gear needs springs built for the weight, and long trails need travel. The TeraFlex Alpine RT3 Outback Overland extended travel system lifts a JT 3.5in and adds heavy-rate Outback coil springs that hold lift height when loaded. The extended-travel components provide 16in of rear suspension travel, and adjustable Alpine IR short arms with IR bushings set the caster and pinion angles. HD forged adjustable track bars center the axles. It fits 33 to 35in tires on Sport and Overland fenders and 35 to 37in on Rubicon and Mojave fenders. Shocks are sold separately. The truck holds its height with a load aboard and keeps its travel on the rocks.

Key Features

• Lift height: 3.5in
• Heavy-rate Outback lift coil springs maintain lift height when loaded
• Extended-travel components provide 16in of rear suspension travel: extended-travel axle brackets, driveshaft lowering spacers, forged ST sway bar and extended-travel accessory kit
• Bolt-on extended-travel axle brackets install between the factory axle mounts and the rear upper control arms
• Rear coil spring retainers keep the springs from unseating during full suspension travel
• Adjustable Alpine IR short arms for caster, pinion angle and anti-squat tuning on 0 to 4.5in lift kits; 42mm x 4mm wall DOM tube; bolts to the factory control arm mounting brackets
• Independent Rotation (IR) bushings remove bushing bind through suspension travel
• HD forged adjustable track bars and track bar brackets
• Front sway bar quick disconnects

Specifications

• Lift height: 3.5in
• Max tire diameter, Sport/Overland fenders: 33in (with 2in front and 1in rear bump stop/strike pad extensions/shims)
• Max tire diameter, Sport/Overland fenders: 35in (with 3in front and 2.5in rear extensions/shims)
• Max tire diameter, Rubicon/Mojave fenders: 35in (with 2in front and 1in rear extensions/shims)
• Max tire diameter, Rubicon/Mojave fenders: 37in (with 2in front and 2.5in rear extensions/shims)
• Rear suspension travel: 16in

Fitment

• Jeep Gladiator JT (pickup) 2020-2025

In the Box

• 3.5in Outback lift coil spring pair (front and rear)
• Alpine IR short arm kit (8-arm, 0-4.5in lift)
• Extended-travel axle bracket kit for rear upper control arms
• HD forged adjustable track bars (front and rear)
• Track bar bracket kits (front lower, 2.5-3.5in lift; rear lower, 0-6.5in lift)
• SpeedBump and progressive bump stop kit (front and rear, 2.5-3.5in lift)
• Front sway bar quick disconnect kit
• Rear forged ST sway bar kit
• 1.5in rear driveshaft lowering kit
• Rear extended-travel accessory kit
• Rear upper and lower coil spring retainer kit
• Brake line anchor kit (front and rear)
• All necessary hardware and more

Notes

• Does not include shocks. Falcon Performance Shocks are recommended and sold separately.

MPN 2033010 · UPC 843885060659