Jeep Gladiator JT 2020-2026, Rock Hard 4x4 Patriot Series Tube Slider Rocker Guards

A Gladiator is long between the wheels, and the rocker panels are the first thing a ledge finds. Factory rails are thin, and a crushed rocker is an expensive repair you notice every time you open the door.

Patriot Series Tube Slider Rocker Guards use 2in x 3in rails in 3/16in wall steel with a welded 1-3/4in tube step. They bolt to the pinch seam, the body mounts and the floor in existing holes, with shims for alignment. Pick angled up or angled down, bolt them on, and slide off the rock instead of folding the rocker.

Key Features

• 3/16in wall steel rails with welded end caps
• Welded 1-3/4in tube step
• 3/8in steel body mount brackets
• Bolt-on with shims, no welding or fender trimming
• Angled Up or Angled Down tube (down sits 1.5in lower)

Specifications

• Rail: 2in x 3in steel, .188 wall
• Tube: 1-3/4in, .120 wall
• Step out: 3in
• Step down: 4in (Angled Up), 5.5in (Angled Down)
• Tube rise above rail: 3.5in
• Finish: black powder coat
• Origin: Made in the USA
• Shipping weight: 140 lb
• Shipping carton: 95 x 20 x 12 in
• Ships by ground or truck freight.

Fitment

• Jeep Gladiator JT 2020-2026

In the Box

• Driver and passenger side tubular rocker guards
• Hardware
• Installation instructions

Notes

• Not compatible with a body lift.
• On 2026 models, unbolt the factory front frame braces before install; reinstall them after if desired.

MPN RH-80104 (Angled Up)

MPN RH-80106 (Angled Down)