Click to open expanded view
Jeep Gladiator JT 2020-2026, Rock Hard 4x4 LoadOut Bed Rack System Info & Specs
Camping gear, a rooftop tent or a fridge all want to ride above the bed, and many bed racks are bent flat plate that flexes under the load.
The LoadOut Bed Rack System uses 2in x 2in, .120 wall square tube with 3/16in steel connection plates. It stands 22in above the bed rails, runs 62in front to back, and has a removable rear bar so tall loads slide in. It bolts into existing holes with hand tools, and once built, two people can lift the whole rack out without taking it apart. Load it up and head out.
Key Features
- 2in x 2in square tube, .120 wall
- 3/16in steel connection plates
- Removable rear streamer bar
- Tie down points at all 4 corners
- Hand tool install into existing holes
- Lifts out in one piece
Specifications
- Tubing: 2in x 2in square, .120 wall
- Plates: 3/16in steel
- Height above bed rail: 22in
- Length: 62in
- Rear width: 54in
- Tailgate to rear crossbar: 19-3/4in
- Finish: black powder coat (raw available)
- Origin: Made in the USA
- Shipping weight: 104 lb
- Shipping carton: 36 x 20 x 9 in
- Ships in more than one box.
Fitment
- Jeep Gladiator JT 2020-2026
Notes
- Optional GearHub Accessory Mounting Panel RH-80660 and GearHub HookHandle RH-80665 fit the uprights.
- Sold for off road use only.
MPN RH-80630
Recommended for You
- Choosing a selection results in a full page refresh.
!