Click to open expanded view
Jeep Gladiator JT 2020-2026, Rock Hard 4x4 Freedom Series Rocker Guards Info & Specs
Not every Gladiator needs a tube step hanging off the side. If your trim left the rocker panels bare, a rock on a mild trail or a high curb in town can still crease them.
Freedom Series Rocker Guards are no-tube rails in 2in x 3in, 3/16in wall steel that clamp to the pinch seam and sit 2-3/4in off the pinch weld. They weigh about 20 lb less per side than tube sliders and bolt on in existing holes with no drilling. Bolt them up and the rockers are covered without changing the look of the truck.
Key Features
- No-tube profile close to the body
- 3/16in wall steel rails with welded end caps
- 3/8in steel body mount brackets
- Bolt-on, no drilling, reversible
- About 20 lb lighter per side than tube sliders
Specifications
- Rail: 2in x 3in steel, .188 wall
- Brackets: 3/8in steel
- Extends 2-3/4in from the pinch weld
- Finish: black powder coat
- Origin: Made in the USA
Fitment
- Jeep Gladiator JT 2020-2026
In the Box
- Driver and passenger side rocker guards
- Hardware
- Installation instructions
Notes
- Not compatible with a body lift.
- On 2026 models, unbolt the factory front frame braces before install; reinstall them after if desired.
MPN RH-80114
Recommended for You
- Choosing a selection results in a full page refresh.
!