Jeep Gladiator JT 2020-2023, ICON 2.5 Series Piggyback CDCV Rear Shocks, Pair, 1.5in Lift

A Gladiator's rear end changes with the load, from an empty bed to a loaded one with a camper on top. One damper setting is soft for the heavy runs and stiff for the light ones.

The ICON 2.5 Series piggyback CDCV rear shock pair has CDC valves with 10 levels of compression adjustment from a turn of a knob. A piggyback reservoir sheds heat, an internal Bump Zone adds 20% damping near full compression, and the shocks are 100% rebuildable and revalveable. Protective shin guards come standard.

Fit the pair with the required sway bar parts, set the knob for the load and go. The rear stays in control.

Key Features

• CDC valve gives 10 levels of high-resolution compression adjustment with the turn of a knob
• Internal Bump Zone increases damping by 20% as the shock approaches full compression
• Piggyback reservoir improves heat dissipation to reduce shock fade
• Nitrogen-charged monotube with a one-piece digressive piston and vehicle-specific valving
• One-piece impact extruded aluminum cylinder; 100% rebuildable and revalveable
• 7/8in induction hardened, chrome plated shaft; PTFE-lined spherical bearings; 6061 aluminum CNC machined components
• Protective shin guards standard with every shock

Specifications

• Position: rear; lift height: 1.5in
• Cylinder: 2.5in; bore: 2.25in; shaft: 7/8in
• Upper and lower mounts: eyelet
• Compression damping: CDCV, 10 settings, manual
• Sold as a pair
• Shipping weight: 25 lb
• Shipping carton: 39 x 10 x 9 in

Fitment

• Jeep Gladiator JT 2020-2023

Notes

• Rear shocks require a sway bar relocation kit or sway bar link kit when used with the JT coil spacer or JT coil spring.

MPN 27727CP · UPC 840103408934