Jeep Gladiator JT 2020-2026, Falcon SP2 3.5 e-Adjust Piggyback Shock Kit, 0-1.5in Lift

Changing shock settings usually means stopping, getting out and reaching under the truck, which nobody wants to do on a steep climb. With the wrong damping, a Gladiator JT rides harder than it needs to or wallows when the trail gets rough.

The Falcon SP2 3.5 e-Adjust piggyback shocks add a 2-position in-cab switch that moves between Soft and a preselected Firm setting. The Firm level is set at the shocks with 8-position micro adjust dials. The piggyback design adds oil and gas capacity to reduce heat.

Mount the shocks for a 0-1.5in lift, run the harness to the switch and set your Firm level. From then on, the change is a flip of the switch.

Key Features

• 2-position in-cab switch toggles between Soft and a preselected Firm setting
• Shock-mounted 8-position micro adjust dials set the Firm level
• Piggyback design adds oil and gas capacity for reduced heat; the gas charge sits in the reservoir to allow maximum travel
• Flows 6x more oil than restrictive reservoir hose designs and avoids the leakage points of banjo and swivel fittings
• Front shock horizontal piggyback reservoir increases tire clearance
• Corner-specific shocks; front lower offset eyelet gives shock body to frame clearance during articulation
• Rear roost guards protect the shock shaft from rocks kicked up by the tires
• Cartridge upgrade kits are available separately

Specifications

• Lift range: 0-1.5in

Fitment

• Jeep Gladiator JT 2020-2026 (Mojave requires Front Shock Bushing Kit 61-99-01-001)

Does not fit EcoDiesel models.

In the Box

• SP2 3.5 e-Adjust piggyback shocks, set of 4
• e-Adjust control module
• In-cab switch, 2-position
• e-Adjust wire harness extension, shocks
• e-Adjust wire harness extension, power
• Rear roost guards
• Mounting hardware

MPN 14-03-35-400-000 · UPC 843885053668