Ford Bronco 6th Gen 2021-2026, ICON Stage 8 Billet Lift Kit, CDEV, 3-4in Lift, Non-Sasquatch

Terrain on a Bronco trip changes by the mile, from highway to rock to washboard. A fixed damper tune is a compromise on all of it, and adjusting by hand means stopping to do it.

The ICON Stage 8 system lifts four-door non-Sasquatch Broncos 3-4in at the front and 2-3in at the rear. Its remote reservoir coilovers use CDEV valves with in-vehicle and active compression adjustment through ICON Intelligent Control, which reads G-forces and chassis movement and changes damping near-instantly. Billet arms, links and an adjustable track bar come with it.

Install the kit, set your preferences in the app and drive. The damping follows the terrain.

Key Features

• CDEV compression damping with in-vehicle adjustment and active adjustment through ICON Intelligent Control (IIC)
• IIC uses onboard sensors to monitor G-forces and chassis movement and makes near-instant compression damping changes
• Billet aluminum upper control arms with on-vehicle caster and camber adjustment and Delta Joint Pro
• Billet rear lower links with pinion angle adjustment; adjustable billet rear upper links; adjustable rear track bar
• Up to 11.5in of front and 14in of rear wheel travel with 35in tires; 100% bolt-on

Specifications

• Front lift: 3-4in; rear lift: 2-3in (four-door non-Sasquatch models)
• Shock bodies: 2.5in front and rear; remote reservoirs; electronic compression adjustment
• Rear springs: progressive triple rate
• Shipping weight: 218 lb
• Shipping carton: 38 x 13 x 8 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (non-Sasquatch models; does not fit Bronco Raptor)

In the Box

• Front and rear CDEV remote reservoir coilovers
• Billet upper control arms, rear lower links and rear upper links
• Adjustable rear track bar, ICON coil springs and lower bar pins

Notes

• Lift heights are for four-door non-Sasquatch models.
• ICON high-clearance crash bars are recommended on non-Sasquatch models with 35in tires; with 37in tires, crash bar removal may be required but is not recommended.
• An iOS device is required to run the ICON Intelligent Control app.
• Does not fit Bronco Raptor.
• Shocks are fully serviceable. Lift heights are for a stock vehicle.
• Two-door models sit taller than four-door models.
• With 37in tires, ICON up-travel limiters are needed at the front and rear.
• Rear reservoir brackets may interfere with some aftermarket step or rock slider mounts; modifications may be required.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Triple-rate rear coils are optimized for a near-stock weight Bronco; their softer initial rates give lower than advertised ride heights as weight is added at the rear.

MPN K40008 · UPC 840103416199