Ford Bronco 6th Gen 2021-2026, ICON Stage 7 Billet Lift Kit, CDCV, 2-3in Lift, Sasquatch

A Sasquatch Bronco starts with a lot of tire and still hits the end of its travel on rock and ruts. Stock links bind, the rear axle fights the tank at full flex, and the ride shakes the camp gear.

The ICON Stage 7 system lifts four-door Sasquatch Broncos 2-3in at the front and 1.25-2.25in at the rear. It adds remote reservoir CDCV coilovers with 10 compression settings, billet upper control arms with Delta Joint Pro, billet rear lower and upper links and an adjustable rear track bar.

Install the kit, set ride height and tune compression to the trail. The Bronco flexes further and settles faster.

Key Features

• Remote reservoir coilovers with CDC valves for 10 settings of compression damping, from soft to hard
• Billet aluminum upper control arms with on-vehicle caster and camber adjustment and Delta Joint Pro
• Billet rear lower links with on-vehicle pinion angle adjustment
• Adjustable billet rear upper links improve fuel tank clearance at full articulation
• Adjustable rear track bar frees up bind and offers on-vehicle rear end alignment
• Up to 11.5in of front and 14in of rear wheel travel with 35in tires; 100% bolt-on

Specifications

• Front lift: 2-3in; rear lift: 1.25-2.25in (four-door Sasquatch models)
• Shock bodies: 2.5in front and rear; remote reservoirs; CDCV compression adjustment
• Rear springs: progressive triple rate
• Shipping weight: 209 lb
• Shipping carton: 38 x 13 x 8 in

Fitment

• Ford Bronco 6th Gen 2021-2026 (Sasquatch package models; does not fit Bronco Raptor)

In the Box

• Front and rear CDCV remote reservoir coilovers
• Billet upper control arms, rear lower links and rear upper links
• Adjustable rear track bar, ICON coil springs and lower bar pins

Notes

• Lift heights are for four-door Sasquatch package models; Bronco Everglades have a front lift range of 1.5-2.5in.
• Does not fit Bronco Raptor.
• Shocks are fully serviceable. Lift heights are for a stock vehicle.
• Two-door models sit taller than four-door models.
• With 37in tires, ICON up-travel limiters are needed at the front and rear.
• Rear reservoir brackets may interfere with some aftermarket step or rock slider mounts; modifications may be required.
• Fitment was tested with ICON and OE steering components; because of tight clearance at the front coilovers, some aftermarket steering components may not be compatible.
• Triple-rate rear coils are optimized for a near-stock weight Bronco; their softer initial rates give lower than advertised ride heights as weight is added at the rear.

MPN K40017 · UPC 840103416298